How To Clean Custom Made Rugs Melbourne

Own custom made Rugs Melbourne? It is a task to keep it clean and dirt free on a daily basis. Apart from the vacuum routine, there are quite a few things you might need to do so that your rug is free of the smell and stains that occur because something fell on it.

Here is a DIY cleaning routine that can be followed for maintaining the longevity of the carpet, and ensuring it is free of stains. 

• Start with removing the loose dirt along the rugs. It is not necessary that all the dirt is actually inside the rug in the form of stains. There are a few things that you can see on the rug, and you need to remove them. it could be pieces of paper, hair or other things. You will need to use vacuum to remove these particles. When cleaning the rug with vacuum, make sure you do it along both sides. It is important, as the back side of the rug accumulates a good amount of dirt
• Before you begin using the cleaner, make sure you test it for colorfastness. The cleaner should not let the rug lose its original color. In case you have a good cleaner or shampoo bought off the store, then you will need to read the instructions given on it for mixing. You can mix that quantity, and first check on the rug. If it does not let off any colour, then use it along the entire rug. In case you don’t have a proper seagrass rugs Melbourne cleaner, then you can use the dish washing soap. Just dilute it to use it for cleaning the rug. In case you are using the cleaner, make sure to avoid using hot water. That can lead to shrinking of the fibre, which means your rug wont last long
• Once the cleaner has done the work, you will need to allow the rug to settle in for a while. Let it be at a side, and allow it to soak in the solution. before you let it be, you should ideally use a scrubber to scrub along all areas of the rug. It will make sure that the soap solution reaches all the parts of the custom made rugs Melbourne, and has settled in perfectly
• Once the soap solution has settled in for a while, it is time to wash the rug with some water. You can use the hose to run the water along the rug, and clean the soap off. You should ideally make sure that the water you are using does not have any soap solution, so that the cleaning process is easier and faster
• The squeegee is an important tool for cleaning the rugs. It helps with removing the excess water from the rugs. Press the tool along the rug, and get it to pull off the liquid from the rug. Using this tool, your rug would be nice and dry
• Once you are done with squeezing out the water, make sure you allow the seagrass rugs Melbourne to rest. Let it dry completely. Once dried, use the vacuum again to remove anything that is stuck to the rugs.